Technical Parameters:
Working PowerRange : AC420V
Overall Dimension : 444*270*380
Working Temperature : (-40~+70)°C
weight : 14kg
Product Overview:
HWP series forced circulation water engine heater is composed of 3 parts (controller, water pump
and water heater). If during cranking the outside temperature is lower than 4°C, engine coolant and lubricant may condense into solid state and lose their lubricating and cooling properties, which can damage the engine. Thus, engine heater should be installed to ensure normal starting and running of the engine when the outside temperature is lower than 4°C.
HWP series forced circulation water engine heater combines the following features: cast stainless steel inner pipes and end closure with high corrosion resistance; heating and overheat light indicators; user-defined thermostat set point; overheat protection. This product is suitable for various engine with (15~100)L displacement. Please login our company's official website (www.smartgen.com.cn) to select heaters.
PERFORMANCE AND CHARACTERISTICS
— The circulating water pump adopts special customized pump with stainless steel pump head.
— Control section: microprocessor design; NTC temperature sampling. Coolant temperature can be set via the control panel. Four digital LED display, current coolant temperature and all kinds of set point temperature can be displayed clearly.
— Overheat protection due to the inner overheating thermostat.
— Separately control of water pump and water heater: power on the water pump and water heater synchronously, once the set temperature has reached, water heater will be powered off firstly, after 60s, following is water pump. The goal is to prevent heat concentration and significantly prolong water pump lifetime.
— Manual test: test the water heater and water pump are normal or not via panel button.
— It features a remote shutdown function, with valid values configurable via panel keys;
— The alarm indication and alarm output functions offers a user-friendly interface and easy operation;
— Fine cast aluminum enclosure;
— Stainless steel inner pipes and sealed end closure;
— There is a water drain valve with seal ring on the bottom of the heater so as to be used when needed;
— There is one-way inlet valve on the water inlet.
— This product can work normally at -40°C temperature.
-38x38.png){kind=small}
