Technical Parameters:
Working PowerRange : DC(8~35)V
Overall Dimension : 250*165*83
Installation Dimension : 237.5*152.5
Working Temperature : (-25~+70)°C
weight : 1.31kg
Product Overview:
HPM6-PPU/HPM6D/HPM6D-PPU-RM power management controller is a special power management system for marine applications. The system carries out genset control, protection, power detection functions. The system is a true multi-master system whose power management function is realized by the calculation of all generator control units. One of the control units is internally defined as the “command unit”, which is responsible for the calculation of the genset power management.
HPM6-PPU can realize the start/stop, synchronization and load sharing for up to 20 gensets. Each control unit is connected via network bus communication, which has device level ring redundancy function.
MODEL CONFIGURATION
According to the function of controllers, it is defined as main diesel genset power management controller (DG), shaft genset power management controller (SG), shore power management controller (SC), transformer power management controller (TR), and bus tie breaker controller (BTB). All controllers share one set of hardware (master control module + display module).
PERFORMANCE AND CHARACTERISTICS
HPM6-PPU power management controller adopts split-type design, which is composed of display module HPM6D/HPM6D-PPU-RM and master control module HPM6-PPU.
─ 4.3-inch LCD, 480x272 resolution with backlight, Chinese, English and other languages display interface;
─ Suitable for 3-phase 4-wire, 3-phase 3-wire, 2-phase 3-wire and single phase systems with frequency 50/60Hz;
─ PLC function enables user to define control logic;
─ User-defined system SLD function;
─ 3-level password protection, two password permissions can customize user configuration items, i.e. configuration items that user can modify can be customized;
─ 3 accumulated data, two user accumulated data (user A and user B), user can clear accumulated data. 3 accumulated data are simultaneously and synchronously calculated, but user A and user B data can be cleared at any time;
─ Parameter setting: parameters can be modified, most of them can be configured from front panel of the controller and all of them can be configured using PC via USB, RS485 or RJ45 ports;
─ Alarm log, which cannot be lost even in case of power outage, maximum 500 pieces can be recorded;
─ Event log, which cannot be lost even in case of power outage, maximum 500 pieces can be recorded;
─ User-defined protocol content function;
─ User-defined bus data function, can read other genset controller data from one controller;
─ Harmonic analysis and generator voltage, current waveform display function;
─ Monitor data curve at real time;
─ Black box function, record data before and after alarm, do data analysis and find problem via PC software;
─ Master control module can record USB, open USB record via PC software can do data analysis;
─ Display module can open USB, save configuration files.
-38x38.png){kind=small}
