Technical Parameters:
Operating Voltage Continuous power supply of 8V-35VDC
Power Consumption <8W (Standby mode: ≤5W)
Case Dimensions 250mmx200mmx81mm
CT Secondary Current Rated:5A
Working Temperature (-25~+70)˚C
Working Humidity (20~93)%RH
Storage Temperature (-30~+80)˚C
Weight 1.2kg
Product Overview:
HGME62series genset controller, integrating digital, intelligent and network techniques, is used for automatic control and monitoring system of single genset. It can carry out functions of automatic start/stop, data measurement, alarm protection and “Three Remote” (remote control, remote measurement and remote communication). The controller employs a large size of LCD screen, with optional language interface including Chinese, English, Spanish, Russian, Portuguese, Turkish, Polish and French. It is easy and reliable to operate.
HGME62 series genset controller uses micro-processor to achieve precision measurement, value adjustment, timing and threshold setting, etc. All the parameters can be configured from the front panel, or adjusted and monitored in the PC via USB interface or RS485 interface). The controller is equipped with internal fuse, and Fuel Relay Output, Start Relay Output, Aux. Relay Output 3 and Aux. Relay Output 4 are pluggable. With compact structure and easy wiring, it will simplify the wiring connection with the control panel, and improve the productivity of genset control panel. It can be widely used in all types of automatic control system for gensets.
PERFORMANC EFEATURES
The main features are as follows:
——132x64 LCD screen with backlight, and optional language interface (Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French). Press the keys to operate;
——Hard acrylic protection layer for the screen to improve the performance of abrasion and scratch resistance;
——The panel and keys employ silicone rubber to well adapt to extreme high and low temperature environment;
——RS485communication port enables “Three Remote” functions via MODBUS protocol;
——The CANBUS port can be connected to ECU engines with J1939. With the port, the controller not only can monitor frequently-used data (such as water temperature, oil pressure, speed and fuel consumption, etc.) but also control the start, stop, high speed and low speed via the CANBUS port (controller with the CANBUS port is required);
——Suitable for 50Hz/60Hz AC system of 3P4W, 3P3W, 1P2W and 2P3W (120V/240V);
——Functions of over/undervoltage and loss of phase for mains;
——Functions of over/under voltage, over/under frequency, over current and over power for genset;
——Precise measurement of parameters from engine;
——Control and protection functions: Automatic start/stop of genset, close/open (ATS control) and perfect fault display and protection;
——WithETS, idle control, pre-heat control, speed raise/drop control, all of them are relay outputs;
——Parameters setting: Allow user to set parameters and store the setting in the internal FLASH memory. The parameters will not be lost even if power off. All the parameters can be configured from the front panel, or adjusted in the PC via USB interface or RS485 interface);
——With built-in button battery to supply the clock and memory on PCB, which makes the controller’s time correct and the data non-lost.
——Multiple sensors, like temperature, pressure and fuel level, can be connected and used directly, and parameters can be defined by users;
——Multiple conditions of crank disconnection (speed, oil pressure, frequency) are optional;
——Emergencystart function;
——Automatic identification of flywheel teeth numbers function;
——Widepowersupply range:(8~35) VDC, which is compatible with different starting battery voltage;
——All parameters employ digital modulation, instead of analog modulation by conventional potentiometer, to improve the reliability and stability of genset;
——Maintenance function. Types (date or running time) can be selected and actions (warning or shutdown) can be set when maintenance time is out;
——Functions of event log, real-time clock, and scheduled start/stop (which can be set as once a day/week/month, and on-load or off-load);
——Addrubber gasket between enclosure and screen, which makes the IP rating to reach IP65;
——Controller can be fixed by metal screws;
——Modular design, flame-retardant ABS enclosure, pluggable terminals, embedded mounting, and compact structure, it is easy to install.
-38x38.png){kind=small}
