Technical Parameters:
Working Voltage Range: DC8V - DC35V continuous, limit voltage DC80V
Overall Consumption Display: <4W (Standby mode: ≤2.5W)
Overall Consumption Master control: <11W (Standby mode: ≤7.0W)
Case Dimensions HGM8510D: 220mm x 130mm x 50mm
Case Dimensions HGM8510M: 250mm x 165mm x 83mm
Working Temperature (-25~+70)°C
Working Humidity (20~93)%RH
Storage Temperature (-30~+80)°C
Weight HGM8510D: 0.58kg
Weight HGM8510M: 1.37kg
Product Overview:
HGM8510 controller is designed for gensets manual/auto parallel system with same or different capacities. Additionally, it is suitable for single unit constant power output and mains grid-connection to realize automatic start/stop, parallel running, data measurement, alarm protection as well as remote control, remote measurement and remote communication functions. It fits with large LCD display, optional Chinese, English and other languages interface, and it is reliable and easy to use.
HGM8510 controller has GOV and AVR control function, which can synchronize and share load automatically to parallel with gensets equipped with HGM8510 controller. Controller can precisely monitor all running status of gensets, and when abnormal occasions occur, gensets can parallel off from the bus and stop, in which process, LCD will display fault status. Controller has SAE J1939 port, and can communicate with various ECU (ENGINE CONTROL UNIT) with J1939.
HGM8510 controller has its own switch function, and controllers are connected by network bus communication with device-level ring-network redundancy function. It can handle complex applications due to its comprehensive fault protection function and flexible scheduled start/stop functions. It can be widely used in all types of automatic genset control system with compact structure, simple connections and high reliability.
PERFORMANCE AND CHARACTERISTICS
HGM8510 controller adopts split-type design, which consists of HGM8510D and HGM8510M.
Main characteristics are as below:
— With 32-bit ARM SCM, high integration of hardware and more reliable;
— 4.3-inch LCD display with 480x272 resolution, optional interface (including English, Chinese);
— Improved LCD wear-resistance and scratch resistance due to hard screen acrylic;
— Silicon panel and pushbuttons for better operation in high/low temperature environment;
— RS485 communication port enables remote control, remote measuring, remote communication via MODBUS protocol;
— Fitted with CANBUS port and can connect with ECU equipped with J1939. It not only can monitor frequently-used data (such as water temperature, oil pressure, speed, fuel consumption and so on) of ECU, but also can control start, stop, raising speed and dropping speed;
— Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase 2-wire, and 2-phase 3-wire systems with voltage 120/240V and frequency 50/60Hz;
— Collects and shows 3-phase voltage of Bus/Gen, Bus/Gen frequency, Gen 3-phase current, Gen power and Gen voltage harmonic parameters;
— For Bus, controller has loss of phase and reverse phase sequence detection functions; For Gen, controller has over voltage, under voltage, over frequency, under frequency, high unbalanced voltage, high total harmonic distortion, over current, earth fault, high unbalanced current, low power factor, over power, reverse power, loss of excitation, loss of phase, reverse phase sequence detection functions;
— Synchronous parameters: voltage difference between bus and gen, frequency difference between bus and gen, phase angle difference between bus and gen;
— Multiple running modes in auto state: on load running, off load running, demand parallel running;
— Ramp on and ramp off function in paralleling/splitting;
— 6 flexible analog sensor inputs can be set as sensors of temperature, pressure or level, 4 sensor inputs can be fixed as resistance type, 2 sensor inputs can be set as resistance, current or voltage type sensors;
— Oil pressure sensor and flexible sensor input 1 can directly connect with resistance/current/voltage sensors, while other sensor inputs can directly connect with resistance sensors, and for connecting voltage/current sensors, please make it clear before the order;
— More kinds of curves of temperature, oil pressure, fuel level sensors can be used directly and users can define the sensor curves by themselves;
— Precisely collect various engine parameters, including temperature, engine oil pressure, fuel level, speed, battery voltage, charger voltage, accumulated running time and accumulated start times etc.;
— Control and protection function: automatic start/stop of the diesel genset, breaker close/open and perfect 2-level fault indication and protection function etc.;
— Parameter setting function: parameters can be modified by users, and most of them can be adjusted from the front panel of the controller and all of them can be modified on PC by USB, RS485, RJ45 ports;
— Multiple crank disconnect conditions (speed,
-38x38.png){kind=small}
