SmartGen HGM6110Z Genset controller

Technical Parameters:
Working PowerRange : DC(8-35)V
Overall Dimension : 209*166*45
Installation Dimension : 186*141
Working Temperature : (-40~+70)°C
weight : 0.65kg


Product Overview:
HGM6100Z series genset controller is the localization product that is specially designed for applying to extremely high/low temperature (-40ºC~+70ºC) environment. It is an automatic control and monitoring system for genset, which integrates digital, intelligent and network techniques. It can reliably work in extreme temperature environment due to its heated LCD and electronic components with good resistance to high and low temperature. Moreover, it carries out functions of automaticstart/stop, data measurement, alarm protection and “three remotes” (remote control, remote measuring and remote communication). The controller uses low temperature LCD display, optional display interface including Chinese, English, Spanish, Russian, Portuguese, Turkish, Polish and French with easy and reliable operation.

HGM6100Z series genset controller uses micro-processing technique which can achieve precision measurement, value adjustment, timing and threshold setting etc. All parameters can be configured from front panel or use USB port (or RS485, ENTHERNET) to adjust via PC. It can be widely used in all types of automatic genset control system for its compact structure, simple connections and high reliability.


PERFORMANCE AND CHARACTERISTICS
HGM6100Z series controller has two types:
HGM6110Z: It is used for single unit automation, controlling generator to start/stop by remote start signal;
HGM6120Z: Based on HGM6110Z, it adds mains electric quantity monitoring and mains/generator automatic switching control (AMF), especially suitable for the automation system composed by mains and genset.

Main characteristics are as below,
- 132*64 LCD display with backlight, heated LCD in low temperature, and optional language interface (Chinese, English, Spanish, Russian, Portuguese, Turkish, Polish and French), push-button operation;
- Hard acrylic screen, improved wear and scratch resistance property. Silicon panel and keys are equipped;
- Widely working temperature (-40ºC~+70ºC) enables the module working in a place of harsh environmental conditions;
- With RS485 communication port, can achieve “three remotes” functions via MODBUS protocol;
- With ETHERNET communication port;
- With CANBUS port which can be connected to ECU with J1939, it not only can monitor frequently-used data (such as water temperature, oil pressure, speed and fuel consumption, etc.) but also can control start, stop, high speed and low speed (controller with CANBUS port is needed) via CANBUS port.
- Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz power system;
- Can measure and display 3 phase voltage, 3 phase current, frequency, power parameter of mains/gens; For mains, it has detection functions of over/under voltage and lack of phase; For gen, it has short circuit functions of over/under voltage, over/under frequency, over current and over power;
- Precisely measure parameters about engine;
- Control protection: Automatic start/stop of genset, breaker close/open (ATS control) and perfect fault display and protection;
- With ETS, idle control, pre-heat control, speed raise/drop control, all of them are relay outputs;
- Parameter setting: Allow user to modify setting and store them in internal FLASH memory. The parameters cannot be lost even when power off. All of parameters can be set not only from the front panel, but also use USB port (or RS485, ETHERNET) to adjust them via PC;
- Multiple sensors of temperature, pressure and fuel level can be used directly, parameters can be defined by user;
- Multiple conditions of crank disconnect (speed sensor, oil pressure, generator frequency) can be selected;
- With emergency start function;
- With automatic identification function of flywheel teeth numbers;
- Widely power supply range: (8~35)VDC, accommodating to different starting battery voltage environment;
- All parameters use digital modulation, instead of analog modulation using conventional potentiometer, improving reliability and stability;
- With maintenance function. Types (date or running time) can be selected and actions (warning or alarm shutdown) can be set when maintenance time out;
- Event log (max.99 pieces), real-time clock, scheduled start & stop (can be set as start unit once a day/week/month whether with load or not);
- Add rubber gasket between shell and controller panel, the protection level can reach IP65;
- Controller is fixed by metal fixing clips;
- Modular design, flame-retardant ABS shell, pluggable terminals, embedded mounting, compact structure and easy installation.