SmartGen HGM6120NC-5 Generator controller, RS485

Technical Parameters:
Working PowerRange : DC(8-35)V
Overall Dimension : 209*166*45
Installation Dimension : 186*141
Working Temperature : (-25~70)℃
Display Multilingual LCD
Panel Silicone Rubber
Comm. Ports USB/RS485
Engine Type MPU
Digital Outputs (DO) 6
Digital Inputs (DI) 5
Analog Inputs (AI) 3
Sensor Type I/R/U R
weight : 0.56kg


Product Overview:
HGM6100N-5 series genset controller, integrating digital, intelligent and network techniques, is used for automatic control and monitoring system of single genset. It can carry out functions of automatic start/stop, data measurement, alarm protection and “three remote” (remote control, remote measurement and remote communication). The controller uses LCD display, optional language interface including Chinese, English, Spanish, Russian, Portuguese, Turkish, Polish and French with easy and reliable operation.

HGM6100N-5 series genset controller uses micro-processing technique which can achieve precision measurement, value adjustment, timing and threshold setting etc. All the parameters can be configured from front panel or use USB interface (or RS485 interface) to adjust via PC. It can be widely used in all types of automatic control system for its compact structure, simple connections and high reliability.

PERFORMANCE AND CHARACTERISTICS
Main characteristics are as following:
➢ 132x64 LCD display with backlight, optional language interface (Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French), push-button operation;
➢ Acrylic screen, improved wearable and scratch resistance property;
➢ Silica-gel panel and keys can well adapt to higher and lower temperature;
➢ RS485 communication port enables “Three Remote” functions via MODBUS protocol;
➢ Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz system;
➢ Can measure and display 3 phase voltage, 3 phase current, frequency, power parameter of mains/gens;
Mains
Line voltage (Uab, Ubc, and Uca)
Phase voltage (Ua, Ub, and Uc)
Frequency Hz
Phase sequence
Generator
Line voltage (Uab, Ubc, and Uca)
Phase voltage (Ua, Ub, and Uc)
Frequency Hz
Phase sequence
Load
Current IA, IB, IC
Each and total active power kW
Reactive power kvar
Apparent power kVA
Power factor PF
Generator accumulated energy kWh
➢ For mains, genset has functions of over/under voltage and loss of phase; For gens, genset has functions of over/under voltage, over/under frequency, over current and over power;
➢ Precision measure and display of parameters about engine;
Temp. (WT) °C/°F
Oil pressure (OP) kPa/psi/bar
Fuel level (FL) %
Fuel remains L
Speed (SPD) r/min
Battery Voltage (VB) V
Charger Voltage (VD) V
Accumulated running hours
Accumulated start times
➢ Control and protection function: Automatic start/stop of genset, load transfer (ATS control) and perfect fault display and protection;
➢ With ETS, idle control, pre-heat control, speed raise/drop control, all of them are relay outputs;
➢ Parameter setting: Allow user to modify setting and store them in internal FLASH memory. The parameters cannot be lost even when power off. All of parameters can be set not only from the front panel, but also adjusted through USB interface (or RS485 interface) via PC;
➢ Multiple sensors of temperature, pressure and fuel level can be used directly. The pressure and oil level sensor inputs can be directly connected to resistance, voltage, or current type sensors, and parameters can be defined by user;
➢ Multiple conditions of crank disconnect (speed, oil pressure, frequency) can be selected;
➢ With emergency start function;
➢ With flywheel teeth numbers automatic identification function;
➢ Power supply range: (8~35)VDC, accommodating to different starting battery voltage environment;
➢ Event log function (max.80 items);
➢ All parameters use digital modulation, instead of analog modulation using conventional potentiometer, having improved reliability and stability;
➢ With maintenance function. Types (date or running time) can be selected and actions (warning or alarm shutdown) can be set when maintenance time out;
➢ Event log, real-time clock, scheduled start & stop function (can be set as start unit once a day/week/month whether with load or not);
➢ Add rubber gasket between shell and controller screen, the waterproof can reach IP65;
➢ Controller is fixed by metal fixing clips;
➢ Modular design, flame-retardant ABS shell, pluggable terminal, embedded mounting, compact structure and easy installation.