SmartGen HGM3020 Generator controller

Technical Parameters:
Working PowerRange : DC(8~35)V
Overall Dimension : 126*106*46.5
Installation Dimension : 111*91
Working Temperature : (-25~+70)℃
weight : 0.232kg


Product Overview:
HGM3020 Genset Controller integrates digital, intelligent and network technology which are used for genset automation and monitor control system of single unit to achieve automatic start/stop, data measurement, alarm protection, etc. functions. It fits with LCD display, optional languages interface (Chinese, English, Spanish, Russian, Turkish, French, Portuguese, and Polish), and it is reliable and easy to use.

HGM3020 Genset Controller adopts micro-processor technology with precision parameters measuring, fixed value adjustment, time setting and set value adjusting, etc. All parameters can be configured from front panel or RS485 interface via PC. It can be widely used in non-ECU genset automatic control system with compact structure, advanced circuits, simple connections and high reliability.

PERFORMANCE AND CHARACTERISTICS
HGM3020 has mains electric quantity monitoring and mains/generator automatic transfer control function (AMF), especially for automatic system composed by generator and mains.

Main features as follows:

128x64 LCD with backlight, selectable language interface (Chinese, English, Spanish, Russian, Turkish, French, Portuguese, and Polish), push-button operation;

Hard-screen acrylic material been used to protect screen with great wear-resisting and scratch-resisting functions;

Single-layer surface covering and pushbuttons can be used in extreme temperature environment;

RS485 communication interface enables “Three remote” functions (remote control, remote measuring and remote communication) according to MODBUSprotocol;

Suitable for 3P4W, 3P3W, 1P2W and 2P3W systems with voltage 120/240V and frequency 50/60Hz;

Collect and display 3-phase voltage, 3-phase current, frequency and power parameter of generator or mains;

For Mains, controller has over /under voltage and loss of phase detection functions; for generator, controller has over/under voltage, over/under frequency, over current and over power detection functions;

Protection: automatic start/stop of the genset, ATS (Auto Transfer Switch) control with perfect fault indication and protection function;

With ETS (energize to stop), idle control, pre-heat control and raise/drop speed control functions, which are all relay outputs;

Parameter setting: parameters can be modified and cannot be lost even in case of power outage; most of them can be adjusted using front panel of the controller and can be modified using PC via RS485 port;

Multiple temperature, pressure, fuel level sensor can be used and self-defined directly;

With multiplex input port 4. Input port 4 can be configured as digital input port or fuel level sensor. It can be flexibly applied in different occasions;

Multiple crank disconnect conditions (generator frequency, speed, oil pressure) are optional;

The speed sampling circuit has been made compatible, so there is no need to distinguish between positive and negative when connecting externalwiring, as it can collect data normally;

Widely power supply range DC(8~35)V, suitable for different starting battery voltage environment;

With event log function. Maximum 99 event logs can be memorized;

Waterproof security level IP65 due to rubber seal installed between the controller enclosure and panel fascia;

The controller is fixed by clips;

Modular design, pluggable connection terminals and embedded installation way; compact structure with easy mounting.