SmartGen ACC5100 Diesel air compressor controller

Technical Parameters:
LCD(320*240)、RS485、CANBUS
Working PowerRange : DC(8~35)V
Overall Dimension : 236*180*74
Installation Dimension : 201*151
Working Temperature : (-40~+70)°C
weight : 0.95kg


Product Overview:
ACC5100 Diesel Air Compressor Controller is used for air compressor with diesel-driven engine in order to realize air compressor start/stop, data measurement, maintenance, alarm protection and “Three Remotes”. It has speed regulator function, and CANBUS (SAE J1939) port, which can control various ECU or non-ECU diesel air compressors.

ACC5100 Diesel Air Compressor Controller applies 32-bit micro-processor technology, which can realize functions of precise measurement for many parameters, set-point adjustment, timing and threshold setting etc. A majority of parameters can be adjusted from the control panel. All parameters can be adjusted and monitored on PC by RS485 or USB port. The front panel integrates emergency stop button, power on/off switch knob, and high/low pressure switch knob. It can be widely used for diesel-driven air compressor control system with integrated design, compact structure, simple wiring, and high reliability.


PERFORMANCE AND CHARACTERISTICS
Main characteristics are as follows:
— 320x240 color LCD display, which is suitable for operation under outdoor sunlight with high brightness backlight; Optional Chinese, English and Russian languages; Simple operation interface;
— Meet the low temperature requirement of -40°C;
— Screen protection is hard screen of acrylic material with better wear-resisting and scratch resistant qualities;
— Silicon panel and buttons with strong adaptive capacity of high/low temperature environment;
— Front panel integrates emergency stop button, power on/off switch knob, and high/low pressure switch knob, which is easy to use with integrated design;
— All the output ports are relay type, and the outputs are equipped with plug-in automotive blade fuses (can be replaced directly without opening the enclosure), which is easy to maintain;
— With RS485 communication port, it can realize “Three Remotes” function by MODBUS protocol;
— With CANBUS port it can monitor ECU common data (speed, water temperature, oil pressure, engine load rate, fuel consumption etc.);
— DPF regeneration function, which meets the control requirements of engine exhaust aftertreatment;
— 6 ways of analog sensors, 3 ways of fixed resistance type sensors, and 3 ways of auxiliary resistance/current/voltage type sensors, which can precisely detect data of engine fuel level, air compressor discharge pressure, discharge temperature, etc.;
— Multiple temperature, pressure, and level sensor curves can be used directly, and custom sensor
curve is also available;
— All kinds of parameters of air compressor can be precisely collected and it has complete protection functions, which provides high water temperature, low oil pressure, over speed, high discharge pressure, high discharge temperature protection, etc.;
— Speed regulator function can automatically adjust speed according to discharge pressure of the air compressor;
— Parameter setting function allows users to change and set the parameters, and at the same time settings are stored in the internal EEPROM memory and will not get lost at power outage;
— Crank disconnect conditions (speed, oil pressure) are optional;
— Speed can be obtained from speed sensor or charging generator W/L;
— Wide power supply range DC (8-35V), which can suit different battery voltage environment;
— Real-time clock; Event log, which can continuously save 200 records;
— Heater, cooler and fuel pump control functions;
— Maintenance function; maintenance time due action can be set;
— Plastic sealing gasket is designed for enclosure and front panel to reach IP65 protection class;
— Modular design, anti-flaming plastic enclosure, pluggable terminals with bolt fixed, embedded mounting on the outside of control box, compact structure and easy installation.